As you install and delete resources in the flash memory of a Zebra printer the amount of free space in the flash memory will gradually decrease (empty blocks in the memory from previously installed elements cannot be reused).
In order for you to workaround this issue InterForm400 provides you with this function. It will erase a specific flash memory drive and rewrite all registered resources in onto the flash memory.
You reach this via these options in InterForm400:
80. Administering InterForm400
4. Work with fonts
19. Initiate ZEBRA flash memory and reload fonts and images
WARNING:
As all data in the specified flash memory drive will be erased you should make sure of this before executing this option:
1. Are all your InterForm400 related resources in flash memory registered in InterForm400?
2. If you have downloaded other resources into the flash memory (not registered in InterForm400) these should be reloaded after the memory has been rewritten. Do you have all resources?
This screen is shown:
Initiate ZEBRA flash memory and reload fonts and images ZRL300D
Output queue . . . . . . . . . ZEBRA_____ Library . . . . . . . . . . QUSRSYS___
Flash drive . . . . . . . . . E (E, B)
Form type . . . . . . . . . . *STD______
F3=Exit F12=Cancel
|
State the output queue where the printer is attached, the flash memory drive and the form type to use for the spooled file, that will execute this function. The spooled file will have the name ‘ZEBRAFLASH’ and user data field ‘INZ-RELOAD’ - with status *RDY.
When the printer is done, it will print samples of all installed soft fonts and a list of all resources in the flash memory, including how much memory they take up, and the amount of memory that are free.
WARNING
When you press Enter on the screen above you will NOT be asked to confirm. So please make sure, that you have all the resources installed before pressing Enter.
